Plug connector locked against contact protection type IP65. Available with transmitter
GL approval for basic types 902044/20 and 902044/21 (max. insertion length 200 mm)
PANEL AND SURFACE MOUNTED THERMOSTAT
Stable switching point position due to ambient temperature compensation (standard)
Operating life at least 250,000 switching cycles for TR and TW
LIQUID ANALYSIS
PH AND REDOX MEASUREMENT
High-quality measurement sensors
Great price-performance ratio
Glass/plastic shaft versions
Variable insertion lengths
Fixed cable connection available as an option
TRANSMITTERS/SWITCHING DEVICES
For connecting conductance sensors in two-electrode technology
Display units µS/cm, mS/cm, kOhm x cm, MOhm x cm, µmho/cm, mmho/cm
Two actual value outputs for conductivity and process temperature
CONTROLLERS/CONDUCTIVITY SENSORS
Features Direct changeover
conductivity (μS/cm or mS/cm)
resistivity (kΩ x cm or MΩ x cm)
TDS measurement (ppm or mg/l)
Calibration options according to measured variable.Calibration logbooks
PRESSURE/LEVEL / FLOW SENSORS
PRESSURE TRANSMITTER LEVEL PROBE
Measuring ranges: 250 mbar to 600 bar relative and 600 mbar to 25 bar absolute
Medium temperature: -40 to +85 째C, optionally increased medium temperature to 200 째C (SIP and CIP capable).
DIFFERENTIAL PRESSURE TRANSMITTER
Medium: gaseous, liquid, or low-aggression
Version with elastomer seal, optional welding
Parts in contact with media: PBT plastic, option with full stainless steel Overload pressure up to 30 bar on one side.
CALORIMETRIC FLOW SENSOR
Analog or switching output
No moving parts
Variable installation position of the sensor (can be rotated 360째)
Switching point is adjustable on-site
HUMIDITY / CONTROL SENSORS
MEASURING PROBE FOR CLIMATE MONITORING
Available in indoor, wall-mounted, channel, and rod versions For applications in facility management as well as in areas of climate and ventilation monitoring
HYGRO& HYGROTHERMAL TRANSDUCER
Facility management
Climate and ventilation control
Residential and office rooms
Storage rooms and cold-storage rooms
Glasshouses/greenhouses
MULTICHANNEL PROCESS & PROGRAM CONTROLLER
The Jumo IMAGO 500 is a process controller and programmer with up to 8 control channels or 4 programming channels.The IMAGO 500 is built for the 144x130mm format for a standard panel cut of 92x92mm.
PAPPERLESS RECORDER
SURFACE & PANEL MOUNTED THERMOSTATS
Liquid expansion
Self-monitoring in the event of a pressure drop
Safety switch-off at -20 °C
1, 2, 3, or 4 single-pole snap-action switches possible
JUMO LOGOSCREEN nt - PAPERLESS RECORDER
144 × 144 mm format, 5.5" TFT color graphics screen.Rotary knob and touchpad operation
3 to 18 universal measuring inputs
External expansion via interface by 54 channels.125 ms memory cycle for 18 analog inputs.Measured data storage on CompactFlash® card / USB flash drive
